ʯ�͹��̎rʯ���W(xu��)���A(ch��)

Chapter 1 Introduction
1.1 Overview of Rock Mechanics
1.2 History of Rock Mechanics
1.3 Research Methods of Rock Mechanics
1.4 Research Objects and Characteristics of Rock Mechanics in Petroleum Engineering
Questions
Chapter 2 Mechanical Properties and Deformation Characteristics of Rocks
2.1 Mechanical Properties of Rocks
2.2 Rock Uniaxial Compression Test
2.3 Rock Triaxial Compression Test
2.4 Tensile Fracture Test of Rock
2.5 Rock Creep and Its Mechanism
Questions
Chapter 3 Theory of Rock Strength
3.1 Mohr-Coulomb Criterion
3.2 Drucker Prager Criterion
3.3 Griffith Criterion
3.4 Murrel Extension of Griffith Criterion
Questions
Chapter 4 Fluid Pressure and Flow in Rock
4.1 Porosity and Permeability of Rock
4.2 Fluid Flow in Pores
4.3 Commonly Used Petrophysical Models
4.4 One-dimensional Consolidation
4.5 Effective Stress in Rocks
Questions
Chapter 5 Oil Field In-situ Stress and Stress State of Surrounding Rock of Borehole Wall
5.1 Pore Pressure
5.2 In-situ Stress Analysis of Oilfield
5.3 Stress Distribution of Vertical Wellbore
5.4 Stress Distribution of Confining Rock in Horizontal Well and High Angle Deviated Well
5.5 Method to Confirm Oilfield In-situ Stress
5.6 Prediction Model of Oilfield In-situ Stress
Questions
Chapter 6 Wellbore Collapse and Diameter Reduction
6.1 Wellbore Collapse
6.2 Under Gauge of Borehole in Plastic Formations
6.3 Wellbore Deformation in Viscoelastic Formation
6.4 Critical Collapse Time of Water-sensitive Shale Formation
Questions
Chapter 7 Borehole Collapse
7.1 Mechanical Mechanism of Vertical Borehole Wall Fracture
7.2 Engineering Prediction Model of Fracture Pressure
7.3 Shaft Wall Fracture in Highly Deviated Well
7.4 Drilling Fluid Density Window in Highly Deviated Wells
Questions
Chapter 8 Hydraulic Fracturing
8.1 Overview of Hydraulic Fracturing
8.2 Numerical Simulation of Hydraulic Fracturing
8.3 Small-scale Fracturing
8.4 Hydraulic Fracturing Physical Simulation
Questions
Chapter 9 Sand Production from Oil and Gas Wells
9.1 Overview of Sand Production in Oil and Gas Wells
9.2 Models of Sand Arch
9.3 Common Prediction Methods of Sand Production Engineering
9.4 Sand Control Methods and Their Selection
Questions
Chapter 10 Application of Acoustic Logging and Seismic Data to Rock Mechanics
10.1 P-wave and S-wave in Elastic Media
10.2 Determination of Rock Elastic and Strength Parameters by Acoustic Logging
10.3 Three Pressures Determination Using Acoustic Logs
10.4 Engineering Prediction Theory of Seismic Data
Questions
References